Frequent questions
Where can I buy the products?
FITT products are available to buy at the physical stores that you can find in the store locator or from Amazon
What is the initial length of FITT Yoyo/FITT Ikon?
The initial length of the hose is approximately half the length indicated on the package. After a few uses with domestic water pressure (on average around 3 bar), FITT Yoyo/FITT Ikon will stretch to about twice its original length..
Can I connect two hoses?
Yes, it is possible to connect two FITT Yoyo/FITT Ikon to each other. To do this, you will need to purchase a simple fitting with two male ends.
Remember that increasing the length can reduce the water flow rate and the ability of the hose to extend, even if only slightly.
Yes, it is possible to connect two FITT Force to each other. To do this, you will need to purchase a simple fitting with two male ends.
Remember that increasing the length can reduce the water flow rate, even if only slightly.
Yes, it is possible to connect two FITT NTS to each other. To do this, you will need to purchase a simple fitting with two male ends.
Remember that increasing the length can reduce the water flow rate and the ability of the hose to extend, even if only slightly.
Can I replace the fittings or the gun?
Yes, it is possible to replace the fittings or the gun. They are available for sale at the physical stores in the store locator or from Amazon
What can I do if FITT NTS is punctured?
If the holes are at the end of the hose and near the fittings, we recommend to cut off the damaged section and reconnect the fittings. Check out the tutorial online
If the holes are at the end of the hose and near the fittings, we recommend to cut off the damaged section and reconnect the fittings.
Watch the tutorial online
If the holes are at the end of the hose and near the fittings, we recommend to cut off the damaged section and reconnect the fittings.
Is it anti-algae? Does it contain heavy metals? is it sunlight resistant?
- <strong><strong>FITT Yoyo and Fitt Ikon</strong></strong>
- <strong>FITT Force</strong>
- <strong>FITT NTS</strong>
For us at FITT quality matters: FITT Yoyo/FITT Ikon does not contain heavy metals, is resistant to sunlight and thanks to its matt surface is also anti-algae.
Moreover, it’s suitable for contact with food (Reg. EU 10/2011 – Simulant A).
For us at FITT quality matters: FITT Force does not contain heavy metals, is resistant to sunlight and thanks to its matt surface is also anti-algae.
For us at FITT quality matters: FITT NTS does not contain heavy metals, is resistant to sunlight and thanks to its matt surface is also anti-algae.
Can I connect FITT Yoyo/FITT Ikon/FITT Force to a pump?
Yes, you can connect FITT Yoyo/FITT Ikon to the delivery of a pump (not at the suction) with a maximum operating pressure of 4 bar.
Yes, you can connect FITT Force to the delivery of a pump (not at the suction) with a maximum operating pressure of 7bar.
What is the minimum working pressure to get the hose extension indicated on the package? EU: ONLY APPLIES TO FITT Yoyo and FITT Ikon –
The minimum operating pressure for FITT Yoyo/FITT Ikon is 1 bar.
It reaches the length stated on the package with a domestic pressure of 3 bar and can also be used at higher pressures (we recommend not exceeding 4bar).
Can I connect FITT Yoyo/FITT Ikon/FITT Force/FITT NTS to a high-pressure washer?
Yes, you can use FITT Yoyo/FITT Ikon/FITT Force to feed your domestic pressure washer (maximum flow rate 600l/h max).
We advise to always check the characteristics of the pressure washer.
What happens if FITT Yoyo/FITT Ikon/FITT Force/FITT NTS is exposed to cold for a long time?
Tests carried out on FITT Yoyo/FITT Ikon/FITT Force at low temperatures show no detrimental effects on product performance.
We recommend emptying the hose after use to prevent the water inside from freezing.
Can I also use FITT Yoyo/FITT Ikon/FITT Force/FITT NTS as a standard hose with sprinklers?
We do not recommend connecting FITT Yoyo/FITT Ikon to a sprinkler, as it will interfere with its stability.
Yes, FITT Force can be connected to a sprinkler.
Yes, FITT NTS can be connected to a sprinkle
Can I wind FITT Yoyo/FITT Ikon/FITT Force/FITT NTS on a hose trolley?
The properties of FITT Yoyo/FITT Ikon do not make the hose suitable for use with a hose trolley.
Yes, you can use FITT Force with a hose trolley.
Yes, you can use FITT NTS with a hose trolley.
Can I use FITT Yoyo/FITT Ikon/FITT Force/FITT NTS on gravel or particularly rough surfaces?
- <strong><strong>FITT Yoyo e</strong></strong><br>and<strong><strong> Fitt Ikon</strong></strong>
- <strong>FITT Force</strong>
- FITT NTS
We do not recommend dragging FITT Yoyo/FITT Ikon on very sharp (e.g. rose bushes or plants with thorns) and abrasive (e.g. asphalt) surfaces/areas.
Yes, you can use FITT Force on gravel or a particularly rough surface.
Yes, you can use FITT NTS on gravel or a particularly rough surface.
Does FITT Yoyo/FITT Ikon/FITT Force/FITT NTS work with all guns/nozzles?
Yes, the multifunction spray gun can be replaced with other accessories on the market featuring a quick connection system.
What is the flow rate of FITT Yoyo/FITT Ikon/FITT Force/FITT NTS?
The flow rate of FITT Yoyo/FITT Ikon/FITT Force depends on the type of jet selected on the multifunction spray gun, the domestic water pressure and the hose length purchased.
Is FITT Yoyo/FITT Ikon/FITT Force/FITT NTS suitable for drinking water?
Yes, FITT Yoyo/FITT Ikon is suitable for food contact (Reg. EU 10/2011 – Simulant A), for the passage of drinking water, and can be used for watering vegetables and washing pets.
No, FITT Force is not suitable for drinking water.
Yes, FITT NTS is suitable for food contact (Reg. EU 10/2011 – Simulant A), for the passage of drinking water, and can be used for watering vegetables and washing pets